SPINE INSTRUMENTS • Spine Tools

Click thumbnail image for details


Assistant Free™ Orthopedic Needle Holder/Scissors	Goldstein Suture Cutter	Hannum Rongeur/Grasper	Intraarticular Tissue Grasper/Rongeur	Intraarticular Tissue Grasper/Rongeur with Locking Ratchet


Joint, Calcaneal and Small Bone Distractors	Micro Curettes	Mobasser Bayonet Forcep	Offset Long Curettes	Rogozinski Offset Ring Curette


Rogozinski Rongeur	Small Bone Compressor/Distractor	Universal Bone Grafting/Impacting Forceps

Assistant Free™ Orthopedic Needle Holder/Scissors

Drive a needle and cut a suture without changing instruments

Assistant Free™ Orthopedic Needle Holder/Scissors

Assistant Free™ Orthopedic Needle Holder/Scissors

Assistant Free™ Orthopedic Needle Holder/Scissors

Designed to drive a needle and cut a suture without changing instruments. Longer sizes are helpful in orthopedics.

Product No's:
3043 [4.5" Standard] NEW!
3045 [4.5" with Tungsten Carbide Tips] NEW!
3050 [5.5" Standard]
3055 [5.5" with Tungsten Carbide Tips]
3060 [6.5" Standard]
3065 [6.5" with Tungsten Carbide Tips]
3070 [7.0" Standard]
3075 [7.0" with Tungsten Carbide Tips]

Download Product Brochure (PDF)

TOP

Goldstein Suture Cutter Allows for the use of a replaceable standard #10 scalpel blade, ensuring a precise cut and reducing the risk of tearing a suture, suture material, or surrounding tissue				Designed by Wayne M. Goldstein, MD

				1. Cutting blade is easily replaceable, ensuring a sharp, precise cut every time. 2. Suture hook is used to grasp the suture and slightly pull it away, applying the proper tension for a clean, precise cut. 3. Push button is depressed with the thumb to engage the forward cutting action. 4. Pistol grip handle allows comfortable, one-handed use. 5. Uses standard #10 scalpel blade (not included). 6. Spring clamp holds the cutting rail down, and can be moved aside, allowing the cutting rail to be rotated upward to facilitate a quick blade change. The entire unit is autoclavable. Product No: 5159 Overall length: 8.25" Shaft Length: 4.25" WATCH SURGICAL IN-USE VIDEO Download Product Brochure (PDF)
				TOP

Hannum Rongeur/Grasper Teeth in jaw firmly holds bone and tissue				Designed by Scott Hannum, MD

				Non-locking design can be easily gripped while allowing greater pressure to be applied. Available in three jaw sizes: short jaw for holding bone, medium jaw for smaller bones, and long jaw for tissue. Product No's: 1775-01 [Short Jaw] • 8mm Width 1775-02 [Medium Jaw] • 5mm Width 1775-03 [Long Jaw] • 3mm Width Download Product Brochure (PDF)
				TOP

Intraarticular Tissue Grasper/Rongeur Used to securely grasp tissue or can be used to rongeur tissue

				Available in 5", 7" and 9" shaft lengths. Product No’s. 1790-01 [5"] Overall Length: 8" • Shaft Length: 5" 1790-03 [7"] Overall Length: 10" • Shaft Length: 7" 1790-02 [9"] Overall Length: 12" • Shaft Length: 9" Download Product Brochure (PDF)
				TOP

Intraarticular Tissue Grasper/Rongeur with Locking Ratchet Used to securely grasp tissue or can be used to rongeur tissue

				Product No: 1791-02 [9"] Overall Length: 12" Shaft Length: 9" Download Product Brochure (PDF)
				TOP

Joint, Calcaneal and Small Bone Distractors Two hole sizes and two arm designs allow for easier pin size selection and helps with distraction in a variety of indications

				Product No’s: SMALL Overall Length: 6" Holes Diameters: For 1.6mm & 2.5mm K-wire Pins 4210-SS [Closed Arms] 4210-SB [Outspread Arms] LARGE NEW! Overall Length: 8" Holes Diameters: For 1.6mm & 2.5mm K-wire Pins 4210-LS [Closed Arms] 4210-LB [Outspread Arms] Download Product Brochure (PDF)
				TOP

Micro Curettes

Micro Curettes

Product No's:

STRAIGHT
Overall Length: 9.75"
Shaft Length: 4.5"
Product No’s:
4240 Straight Micro Curette • Cup Size 1
4242 Straight Micro Curette • Cup Size 2
4244 Straight Micro Curette • Cup Size 4/0
4246 Straight Micro Curette • Cup Size 6/0

ANGLED 45°
Overall Length: 9.75"
Shaft Length: 4.5"
Product No’s:
4240-01 Angled Micro Curette • Cup Size 1
4242-01 Angled Micro Curette • Cup Size 2
4244-01 Angled Micro Curette • Cup Size 4/0
4246-01 Angled Micro Curette • Cup Size 6/0

Four cup sizes, straight or angled shaft.

Download Product Brochure (PDF)

TOP

Mobasser Bayonet Forcep Designed so that the tips can hold a larger amount of bone graft, and then be used as a tamp to push it down into the disc space				Designed by Jean Pierre Mobasser, MD

				Bayonetted forcep has a long reach, which is particularly helpful in less invasive spine surgery. Product No: 5082 Overall Length: 10" Forcep Ends: 5x10mm Download Product Brochure (PDF)
				TOP

Offset Long Curettes

Offset bayonet shaft allows for better visualization and the large handle can be used two-handed

Oval Cup Curettes with an Up Angle Tip, Offset Bayonet Shaft, and a Two-Handed Handle

Product No’s:
Overall Length: 18.25"
Handle Length: 9.25"
Shaft Offset: 1"
5060-01 • Cup Size 00
5060-02 • Cup Size 0
5060-03 • Cup Size 1
5060-04 • Cup Size 2

Download Product Brochure (PDF)

TOP

Rogozinski Offset Ring Curette Curette is angled to allow access for easier bone preparation for anterior lumbar interbody fusion				Designed by Chaim Rogozinski, MD and Abe Rogozinski, MD

				Product No: 5020 Download Product Brochure (PDF)
				TOP

Rogozinski Rongeur

Designed with cutting direction adjustments of 360°, allowing the instrument to be held in an ergonomic position for enhanced control, strength and precision

Designed by
Chaim Rogozinski, MD
Abe Rogozinski, MD

Threaded K-Wire Removal Forceps

70° CUTTING HEAD

Overall Length: 12.5"
Shaft Length: 9.625"
Product No’s:
5007-02 70°, 2mm Wide
5007-03 70°, 3mm Wide
5007-04 70°, 4mm Wide
5007-05 70°, 5mm Wide

90° CUTTING HEAD

Overall Length: 12.5"
Shaft Length: 9.625"
Product No’s:
5009-02 90°, 2mm Wide
5009-03 90°, 3mm Wide
5009-04 90°, 4mm Wide
5009-05 90°, 5mm Wide

Includes an ejector pin for easy bone fragment removal. Rotating head, with no locks or preset positions eliminates the need to switch to an up-bite or down-bite rongeur.

Download Product Brochure (PDF)

TOP

Small Bone Compressor/Distractor

Designed to distract small joints in a linear direction in hand, spine, and foot surgery

Designed by Richard Wittock, DPM and Robert Baglio, DPM

Small Bone Compressor/Distractor

Multiple hinge design allows better joint visualization and access.
Has a distal hinge which can be loosened once the distraction nut is tightened, thereby allowing the surgeon to move the handle out of the surgical field.

Now Available!

Shouldered Bone Pins

For use with the Small Bone Compressor/Distractors

Product No’s:
1271 [Package of 10]
Pin Diameter: 3.2mm (1/8")

1270 [Package of 10]
Pin Diameter: 1.6mm (1/16")

Product No’s:
Includes Sterilization Case

Overall Length (Flat): 7.5"
Handle Length: 5.25" • Leg Length: 2.25"

1825
Up to 1/16" (1.6mm) Pin Diameter

1825-01
Up to 1/16" (1.6mm) Pin Diameter—With Rotating Arms

1826
Up to 1/8" (3.2mm) Pin Diameter

1826-01
Up to 1/8" (3.2mm) Pin Diameter—With Rotating Arms

Ball Driver Screwdriver included with All Compressor/Distractors
Product No: 1825-BD
Driver Head: 2.5mm
Overall Length: 5.75"

Download Product Brochure (PDF)

TOP

Universal Bone Grafting/Impacting Forceps

Bone graft can be grasped, placed and impacted without changing hands or instruments

Designed by J.A. Amis, MD

The forceps are designed with grasping ends for delivery of bone graft. When the graft is in place, the forceps are closed, which forms the ends into an impacting punch. A striking platform is attached to the end of the forceps for tapping and tamping the graft. Four end diameters are available in two lengths.

Universal Bone Grafting/Impacting Forceps

Universal Bone Grafting/Impacting Forceps

Product No’s:

6" Length

5010-01 [1/8" Diameter End]
5010-02 [3/16" Diameter End]
5010-03 [1/4" Diameter End]
5010-04 [5/16" Diameter End]

10" Length

5050-01 [1/8" Diameter End]
5050-02 [3/16" Diameter End]
5050-03 [1/4" Diameter End]
5050-04 [5/16" Diameter End]

Download Product Brochure (PDF)

TOP

© 2010 Innomed, Inc., All rights reserved.