Click thumbnail image for details
|
|
|
|
|
|
|
|
NEW! Bone Fragment Clamp with Guards
|
Chang Pin Clamp
|
Digit Aligner
|
NEW SIZE! Durkan Ratchet Bone Clamps
|
|
|
|
|
|
|
|
|
Lawton Flexor Tendon Repair Clamp
|
Lewin Small Bone Clamp
|
O'Brien Bone Clamp
|
O'Brien Bone Clamp with Drill Guide
|
Redler Percutaneous Pin Clamp
|
|
|
|
|
|
|
|
Redler Wrist Bone Clamp with Wire Guide
|
NEW! Resnick Allis Bone Clamp
|
Small Bone Holding Forceps
|
|
|
|
|
Bone Fragment Clamp with Guards
|
|
|
|
|
|
|
 |
Guarded tips prevent splintering while providing positive fixation. Sliding ring-lock allows precise setting and release with a touch of the finger.
Product No: L5128
Overall Length: 4.5" (115mm)
|
|
|
Chang Pin Clamp
Designed to allow accurate insertion of pins for internal fixation
|
|
|
|
Designed by W. Chang, MD
|
|
|
 |
Prototype used in X-ray images
Used for small bones, the clamp allows accurate insertion of pins for internal fixation.
Product No: 1760-01
Overall Length: 6"
1.8mm Cannula
Locking Ratchet Opens To: 25mm
|
|
|
Digit Aligner
Radiolucent device designed to help reduce fractures of the small digits
|
|
|
|
|
|
|
   |
Product No’s:
Digit Aligner – 12 Hole
1190-12L Large
Outside Diameter: 1.840"
Inside Diameter: 1.515"
Overall Length: 1.660"
1190-12M Med
Outside Diameter: 1.590"
Inside Diameter: 1.265"
Overall Length: 1.660"
1190-12S Small
Outside Diameter: 1.340"
Inside Diameter: 1.015"
Overall Length: 1.660"
Digit Aligner – 8 Hole
1190-8L Large
Outside Diameter: 1.840"
Inside Diameter: 1.515"
Overall Length: 1.240"
1190-8M Med
Outside Diameter: 1.590"
Inside Diameter: 1.265"
Overall Length: 1.240"
1190-8S Small
Outside Diameter: 1.340"
Inside Diameter: 1.015"
Overall Length: 1.240"
|
|
|
Durkan Ratchet Bone Clamps
Design of ratcheting mechanism allows for quick tightening and release around the bone
|
|
|
|
Designed by John Durkan, MD
|
|
|
|
|
Product No’s:
1867 [Large]
Overall Length: 8.625"
Jaw opens to: 3.5"
1868 [Small] New Size!
Overall Length: 8.5"
Jaw opens to: 3.75"
|
|
|
Lewin Small Bone Clamp
|
|
|
|
|
|
|
|
|
Product No: 4685
Overall Length: 5"
|
|
|
O'Brien Bone Clamps
Designed for use in stabilization of a fracture or osteotomy in small bone surgery
|
|
|
|
Designed by Todd O’Brien, DPM
|
|
|
Integrated drill guide and bone diameter gauge
|
Allows for placement of the bone clamp where it can best stabilize bone fragments. The drill guide allows for screw placement through the top of the clamp. Calibrations on the handle help eliminate the use of a depth gauge.
Product No’s:
1890-01 [Small]
Overall Length: 6"
Calibrated from 8mm to 30mm
8mm drill guide accommodates up to a 4.0mm screw
1890-02 [Large]
10mm drill guide accommodates up to a 6.5mm screw
|
|
|
O'Brien Bone Clamp with Drill Guide
|
|
|
|
Designed by Todd O’Brien, DPM
|
|
|
|
|
Calibrated handle measures bones from 6mm up to 24mm. Guide accommodates 1.5, 2.0 and 2.7mm screws.
Product No: 1815
Overall Length: 5"
Guide Diameter: 6.2mm
|
|
|
Redler Percutaneous Pin Clamp
Holds a small bone in apposition during percutaneous pinning of a fracture
|
|
|
|
Designed by M.R. Redler, MD
|
|
|
|
|
Designed to hold a small bone in apposition during percutaneous pinning of a fracture. The pin clamp is designed with a proximal pin tube with teeth; the tube guides the pin and the teeth help keep the tube in place on the bone. The distal tip is used to control the bone fragment. The pin clamp has a long ratchet for locking on various sized bones, from 1mm to 14mm. The pin clamp is also useful during insertion of cannulated screw guide wires.
Product No's:
1810-35
Overall Length: 5"
.035" (.9mm) diameter tube
1810-45
Overall Length: 5"
.045" (1.1mm) diameter tube
1810-62
Overall Length: 5"
.062" (1.6mm) diameter tube
|
|
|
Redler Wrist Bone Clamp with Wire Guide
|
|
|
|
Designed by M.R. Redler, MD
|
|
|
|
|
Product No’s:
1885-45
.045" diameter tube • 8" overall length
1885-62
.062" diameter tube • 8" overall length
|
|
|
Resnick Allis Bone Clamp
A traditional Allis Bone Clamp designed with a longer ratchet which allows for a wider opening to allow a bone to be clamped and locked onto |
|
|
|
Designed by Charles T. Resnick MD |
|
|
|
Product No: 1385
Overall Length: 6"
Ratcheted Clamp Opens to: 37mm
Clamp End Width: 4.7mm
|
|
|
Small Bone Holding Forceps
|
|
|
|
|
|
|
 |
Product No: 1773
Overall Length: 5.5"
Jaws Open To: 20.4mm
|
|
|
© 2010 Innomed, Inc., All rights reserved.
|
