Click thumbnail image for details
|
|
|
|
|
|
|
Amstutz Femoral Neck Elevators
|
APC Proximal Femoral Elevator
|
Bolanos Hip Retractor
|
Bone Hooks
|
|
|
|
|
|
|
|
NEW! Bozeman Anterior THA Femoral Elevator
|
Extra Leverage Femoral Neck Elevators
|
Extra Leverage Proximal Femoral Elevator
|
NEW SIZE! Femoral Elevator for Total Hip Resurfacing
|
Goldstein Flanged Femoral Elevator
|
|
|
|
|
|
|
Gordon Hip Resurfacing Retractor |
Lombardi Bone Hooks
|
McMahon Posterior Femoral Retractor
|
Mueller-type Femoral Neck Elevator
|
Proximal Femoral Elevators
|
|
|
|
|
|
|
|
|
NEW! Retractor Extender
|
Stulberg Proximal Femoral Elevator
|
Thornhill Offset Proximal Femoral Elevators
|
NEW! Wertz Anterior THA Femoral Elevator
|
|
|
|
Amstutz Femoral Neck Elevators
Used for acetabular exposure
|
|
|
|
Designed by Harlan C. Amstutz, MD
|
|
|
 |
ProductNo's:
3410 [Wide Blade]
Overall Length: 12.25" •
Blade Width at Widest: 67mm
3410-01 [Narrow Blade]
Overall Length: 12.25" • Blade Width at Widest: 50mm
|
|
|
APC Proximal Femoral Elevator
Elevates the proximal femur during total hip or hemi-arthroplasty surgery
|
|
|
|
Designed by APC, Inc.
|
|
|
 |
Designed to elevate the proximal femur during total hip or hemi-arthroplasty surgery. Its unique design provides excellent access to the intramedullary canal. The elevator's geometry incorporates serrated edges to grip and elevate the proximal femur. Modular weights can be used to help hold the elevator in place. Small and standard sizes are both recommended to accommodate all size patients.
Product No's:
3421-00 [Standard]
Overall Length: 10.75"
Blade Width at Widest: 63mm
3421-01 [Small]
Overall Length: 10.75"
Blade Width at Widest: 50mm
|
|
|
Bolanos Hip Retractor
Designed to help improve femoral exposure while reducing the risk of trochanteric fractures in both posterior and anterior approaches |
|
|
|
Designed by Alberto Bolanos, MD |
|
|
|
Designed to lever against cortical bone at the subtrochanteric level, which helps spare the greater trochanter from stresses. The wrap-around design helps the assistant to retract the entire gluteus medius during femoral preparation.
Product No's:
6350-R [Right]
Overall Length: 12.5"
Handle Length: 4.5"
6350-L [Left]
Overall Length: 12.5"
Handle Length: 4.5"
|
|
|
Bone Hooks
|
|
|
|
Designed by R.L. Wixson, MD
|
|
|
Bone Hook Ends at Actual Size
|
Designed for proximal femoral elevation in total hip replacement or in other surgery with a similar need for bone manipulation. The instrument has a blunt tip and a large handle to accommodate the use of two hands if desired.
Product No’s.
5910 [Small] • 25mm Curve Diameter
5915 [Medium] • 35mm Curve Diameter
5920 [Large] • 50mm Curve Diameter
Overall Length: 12.75"
Handle Length: 4.75"
|
|
|
Extra Leverage Femoral Neck Elevator
Used for acetabular exposure |
|
|
|
Designed by Wayne M. Goldstein, MD |
|
|
 |
Product No's:
7650 [Standard]
Overall Length: 18.25" • Handle Length: 9.25"
Blade Width: 38mm
7650-02 [Short Handle]
Overall Length: 15.25" • Handle Length: 6.25"
Blade Width: 38mm
|
|
|
Extra Leverage Proximal Femoral Elevator
For increased leverage and depth with large patients
|
|
|
|
Designed by Wayne Goldstein, MD
|
|
|
 |
Product No: 7640
Overall Length: 17.5"
Handle Length: 13"
Blade Width at Widest: 63mm
|
|
|
Femoral Elevator for Total Hip Resurfacing
Helps to elevate the femur and provide a trough for bone to collect in during shaping of the femoral head during total hip resurfacing
|
|
|
|
Designed by Henry Boucher, MD
|
|
|
|
Designed for femoral head preparation during total hip resurfacing, the elevator is placed against the anterior femoral neck when the femur is flexed and internally rotated. Helps to elevate the femoral head for milling, and the “trough” provides a channel for the instruments and allows for easy clearance of reamings. Skin, abductor, subcutaneous fat and capsule are protected and retracted with the trough.
Product No: 6030 New Narrower Trough!
Overall Length: 17.25"
Handle Length: 9"
Prong Length: 1"
Prong Width: 9mm | 18mm Gap | 9mm
Trough–At Widest: 4"
Trough–At Narrowest: 2.5"
|
|
|
Goldstein Flanged Femoral Elevator
Designed to easily and gently elevate the femoral neck and prevent soft tissues from covering the medial femoral neck
|
|
|
|
Designed by Wayne M. Goldstein, MD
|
|
|
|
|
Allows enhanced visualization of the neck osteotomy even in a small incision. The flange also helps hold the elevator securely under the neck so it will not slip out during the vibration with broaching.
Products No's:
7655-R [Right]
Overall Length: 20.25"
Handle Length: 12"
Blade Width: 38mm
Blade Flange: 10mm x 17mm
7655-L [Left]
Overall Length: 20.25"
Handle Length: 12"
Blade Width: 38mm
Blade Flange: 10mm x 17mm
|
|
|
Gordon Hip Resurfacing Retractor
Gently curved retractor tip safely cradles and protects the femoral neck while gaining improved head exposure for resurfacing the femoral head
|
|
|
|
Designed by Stuart Gordon, MD
|
|
|
|
|
Designed with a tissue-sensitive shape for elevating the femoral head during hip resurfacing.
Product No: 7649
Overall Length: 17"
Handle Length: 6.75"
Blade Width at End: 55mm
|
|
|
Lombardi Bone Hooks
Used to tighten cerclage wire around a bone
|
|
|
|
Designed by Adolph V. Lombardi, Jr., MD
|
|
|
|
|
3 Sizes Available
Product No’s:
5925 [Small] • 25mm Curve Diameter
5930 [Medium] • 35mm Curve Diameter
5935 [Large] • 50mm Curve Diameter
|
|
|
McMahon Posterior Femoral Retractor
Used in the posterior approach to lift the proximal femur |
|
|
|
Designed by Steve McMahon, MD |
|
|
|
After exposing the lesser trochanter, the distal lip of the retractor hooks under the psoas tendon in close contact to the bone. The adjacent tip of the body of the retractor sits under the calcar. The combined action lifts the proximal femur and the body of the retractor creates a space in which to prepare the proximal femur. The handle is bent twice at 30° to move the assistant's hand out of the way.
Product No’s:
6443-01 [Left]
Overall Length: 13.5"
Handle Length: 7.5"
6443-02 [Right]
Overall Length: 13.5"
Handle Length: 7.5"
|
|
|
Mueller-type Femoral Neck Elevator
|
|
|
|
Designed by APC, Inc.
|
|
|
 |
Product No: 3415
Overall Length: 13.5"
Handle Length: 6.5"
Blade Width at Widest: 25mm
|
|
|
Proximal Femoral Elevators
Help provide better access to the intramedullary canal
|
|
|
|
|
|
|
|
Designed to elevate the proximal femur during total hip surgery while providing better access to the intramedullary canal. The handles are contoured to allow the surgeon a clear field of view of the operating area.
Product No's:
3420-01 [Standard Prongs]
Overall Length: 11.5"
Handle Length: 6.5"
Blade Width at Widest: 63mm
3420-02 [Short Prongs]
Overall Length: 10.75"
Handle Length: 6.5"
Blade Width at Widest: 63mm
3420-05 [Narrow with Standard Prongs]
Overall Length: 11.5"
Handle Length: 6.5"
Blade Width at Widest: 45mm
3420-08 [Narrow with Narrow Prongs]
Overall Length: 11.75"
Handle Length: 6.5"
Blade Width at Widest: 45mm
|
|
|
Retractor Extender
Designed to extend the length of many standard retractors |
|
|
|
Designed by Ed McPherson, MD |
|
|
|
Tip is bent for insertion in flat handle retractor holes.
Product No: 6022
Overall Length: 18.5"
|
|
|
Stulberg Proximal Femoral Elevator
|
|
|
|
Designed by S. David Stulberg, MD
|
|
|
|
|
Product No: 3420-09
Overall Length: 14"
Handle Length: 10"
Blade Width at Widest: 48mm
Blade Width at Prongs: 24mm
|
|
|
Thornhill Offset Proximal Femoral Elevators
For general use in hip surgery and minimally invasive hip surgery
|
|
|
|
Designed by Thomas Thornhill, MD
|
|
|
|
|
Retractor handles are designed for optional use with modular weights to help hold the retractors in place.
Product No’s:
7651-01 [Right]
Overall Length: 16"
Handle Length: 7"
Blade Width: 38mm
7651-02 [Left]
Overall Length: 16"
Handle Length: 7"
Blade Width: 38mm
|
|
|
Wertz Anterior THA Femoral Elevator
Helps deliver the femur out of the incision during anterior total hip arthroplasty |
|
|
|
Designed by Michael P. Wertz, MD |
|
|
|
Inserted into the femoral canal for elevation, the knurled underside helps to reduce the chance of slippage.
Product No: 6148
Overall Length: 12.625"
Blade Length: 3"
|
|
|
© 2012 Innomed, Inc., All rights reserved.
|
